Dimmer / switch units
The dimmer/switch has a rugged die-cast aluminum case with detachable cable connections. With extension cables of appropriate length (see below), it can be located at any distance from the flange light. Using 130 Hz pulse width modulation, it offers a fine grained control of intensity, with approximately 5 turns full range, and has particularly high resolution at low intensities. The brightness value is saved when turned off and restored when turning back on, even with disconnected power.
| Brightness setting | via rotary encoder |
| On/off | push on encoder |
| Power indicator | on/off, brightness via red LED |
| Voltage | 5...24 V DC |
| Max. current | 2 A |
| Dimensions | 80✕55✕45 mm³ |
| Connections | M8, three pin |
| Pin 1 | brown, not used |
| Pin 3 | blue, 0 V |
| Pin 3 | black, 24 V |
Extension cable to connect the dimmer/switch to a flange light. Available in standard lengths of 1 m, 2 m and 3 m. Other lengths available on request.
The economy version of the switch/dimmer has a plastic case and fixed cable connections. Please specify the cable length between dimmer and flange light when ordering. Using 130 Hz pulse width modulation, it offers a fine grained control of intensity, with approximately 5 turns full range, and has particularly high resolution at low intensities. The brightness value is saved when turned off and restored when turning back on, even with disconnected power.
| Brightness setting | via rotary encoder |
| On/off | push on encoder |
| Power indicator | on/off, brightness via red LED |
| Voltage | 5...24 V DC |
| Max. current | 2 A |
| Dimensions | 80✕57✕41 mm³ |
| Connections | M8, three pin |
| Pin 1 | brown, not used |
| Pin 3 | blue, 0 V |
| Pin 3 | black, 24 V |